Mistake on this page? Email us

Event log codes

General

Event log code Portal text Possible corrective action
UPD2_FAIL_3 Manifest rejected, URI invalid Check the manifest was sent to the device.
UPD2_FAIL_4 Manifest rejected, integrity check failed Check the symmetric keys.
UPD2_FAIL_6 Manifest rejected, certificate not found Check Update certificate exists.
UPD2_FAIL_7 Manifest rejected, signature verification failed Check signature.
UPD2_FAIL_11 Connection lost during download Check the device's connectivity.
UPD2_FAIL_12 Asset failed integrity check Check the hashes of the firmware.
UPD2_FAIL_13 Unsupported asset type Check the vendor ID, class ID, and device ID.
UPD2_FAIL_14 Invalid asset URI Check the URI in the manifest.
UPD2_FAIL_15 Timed out downloading asset Check the device's connectivity.

Update

Event log code Portal text Explanation Possible corrective action
UPD4_OK_M1 Update initial value (no event) Initial state to avoid erroneous events being reported; ignored by service.
UPD4_OK_100 Update succeeded event Update completed successfully.
UPD4_FAIL_101 Update error, nonspecific network error Generic network error for conditions not covered by other network error codes. Check network.
UPD4_FAIL_102 Update error, nonspecific payload error Generic payload error. Call FAE.
UPD4_FAIL_103 Update error, nonspecific system error Generic system error, for internal errors the client is not expected to resolve. Call FAE.

Manifest Validation

Event log code Portal text Explanation Possible corrective action
UPD4_FAIL_200 Manifest validation, nonspecific error Generic error occurred during manifest validation. Call FAE.
UPD4_FAIL_201 Manifest network error, nonspecific network error Generic network error occurred during manifest validation. Check network.
UPD4_FAIL_202 Manifest network error, time out Network time out error occurred during manifest validation. Check network.
UPD4_FAIL_203 Manifest network error, connect failed Network connect error occurred during manifest validation. Check network.
UPD4_FAIL_204 Manifest network error, DNS lookup failed DNS lookup error that occurred during manifest validation. Check network.
UPD4_FAIL_205 Manifest network error, connection loss Network timeout error that occurred during manifest validation. Check network.
UPD4_FAIL_206 Manifest rejected, manifest not found Either the latest manifest, or a dependent manifest, was not found. Call FAE.
UPD4_FAIL_207 Manifest rejected, integrity check failed (hash error) The hash included in the outer part of the manifest (signature container) does not match the calculated hash of the inner part of the manifest. Manifest was edited or corrupted in transit. Retry.
UPD4_FAIL_208 Manifest rejected, certificate not found A matching certificate could not be loaded from storage because of a storage error, or item not found, or item doesn't match expected value. Check that certificates were provisioned correctly. Check for storage errors.
UPD4_FAIL_209 Manifest rejected, invalid certificate The certificate is not valid because it could not be parsed, was the wrong size, or could not allocate working space. Check that certificates were provisioned correctly. Check for storage errors.
UPD4_FAIL_210 Manifest rejected, signature invalid The manifest could not be validated, probably because the locally calculated manifest signature does not match that on the manifest itself, but also for any other validation failure. Check that certificates were provisioned correctly. Check for storage errors. Make sure manifest was signed using correct private key.
UPD4_FAIL_211 Manifest rejected, dependent manifest not found Processing the update failed because a specified manifest dependency could not be satisfied. Call FAE.
UPD4_FAIL_214 Manifest rejected, unsupported manifest version The received manifest is in a format that is not supported by the device. Call FAE.
UPD4_FAIL_215 Manifest rejected, wrong vendor ID The vendor ID in the received manifest does not match the vendor ID stored on the device. Check that device was provisioned correctly. Check manifest.
UPD4_FAIL_216 Manifest rejected, wrong class ID The class ID in the received manifest does not match the class ID stored on the device. Check that device was provisioned correctly. Check manifest.
UPD4_FAIL_217 Manifest rejected, invalid manifest size The received manifest is too large for the internal buffers that have been allocated for processing it. Reduce buffer size. Check client buffer configuration. Reduce amount of text in manifest description.
UPD4_FAIL_218 Manifest rejected, invalid manifest format (DER format) The received manifest has an invalid format: either it could not be processed, or some necessary elements could not be found. Check manifest generation by running manifest-tool parse -ji input_file. Check that correct manifest was used in campaign.
UPD4_FAIL_219 Manifest rejected, invalid crypto mode The received manifest uses an unsupported crypto mode, or the required crypto mode could not be read from the manifest. Check manifest generation by running manifest-tool parse -ji input_file. Check that correct manifest was used in campaign.
UPD4_FAIL_220 Manifest rejected, missing field There is an empty field in the received manifest that should not be empty. Check manifest generation by running manifest-tool parse -ji input_file. Check that correct manifest was used in campaign.
UPD4_FAIL_221 Manifest rejected, rollback protection You tried to update to an older firmware version than the one already on the device. Check that the firmware version you are flashing is newer than the existing one.
UPD4_FAIL_222 Manifest rejected, missing keytable A required key table, class GUID or vendor GUID could not be found in device storage. Check that device was provisioned correctly. Check manifest.
UPD4_FAIL_223 Manifest rejected, corrupted keytable The key table IV size is out of the allowed range, or the key table prefix does not match, or the key table could not be read. Check manifest generation. Check that correct manifest was used in campaign.
UPD4_FAIL_225 Manifest processing error, insufficient storage There is not enough space on the device to store a payload of this size. Check device storage.
UPD4_FAIL_226 Manifest processing error, insufficient memory There was insufficient space allocated for reading a device, class or vendor GUID. Check device RAM.

Update Fetching

Event log code Portal text Explanation Possible corrective action
UPD4_FAIL_301 Resource network error, nonspecific network error Generic network error. Check network.
UPD4_FAIL_302 Resource network error, no route available A route to use for fetching the resource could not be found (one or more might have been tried and failed). Check network.
UPD4_FAIL_303 Resource network error, time out Network connection timed out. Check network.
UPD4_FAIL_304 Resource network error, connect failed Network connection error that occurred during resource fetching. Check network.
UPD4_FAIL_305 Resource network error, DNS lookup failed DNS lookup error that occurred during resource fetching. Check network.
UPD4_FAIL_306 Resource network error, connection loss Network time out error that occurred during resource fetching. Check network.
UPD4_FAIL_307 Resource fetching, resource URI invalid An invalid URI was presented as the address of a resource to be fetched. Check URI in manifest is correct.
UPD4_FAIL_308 Resource fetching, request type invalid A request was made for a resource not supported by the device, or a resource of an unknown or invalid type. Call FAE.
UPD4_FAIL_310-314 User-defined errors.
UPD4_FAIL_315 Resource fetching permission denied by application
UPD4_FAIL_316 Resource fetching permission could not be provided by application

Update Processing

Event log code Portal text Possible corrective action
UPD4_FAIL_400 Payload processing, nonspecific error Call FAE.
UPD4_FAIL_401-405 Payload processing, user-defined error[s]
UPD4_FAIL_406 Processed result does not match expected hash
UPD4_FAIL_407 Payload processing parse error
UPD4_FAIL_408 Manifest rejected, insufficient storage space for processing
UPD4_FAIL_409 Manifest rejected, insufficient memory space for processing

Update Writing

Event log code Portal text Explanation Possible corrective action
UPD4_FAIL_500 Payload writing error, nonspecific error A general error was encountered while writing (typically an internal error). Call FAE.
UPD4_FAIL_503 Payload writing error, write error Storage failed to be either prepared, written to, or finalized. Check for storage error (improperly fitted SD card or driver error). Retry update.
UPD4_FAIL_504 Payload writing error, hash error The locally calculated hash of the stored payload does not match the expected hash. Check for storage error (improperly fitted SD card or driver error). Retry update.
UPD4_FAIL_505 Payload writing error, activate error A payload could not be installed or activated. Retry update.
UPD4_FAIL_506-510 Payload writing error, user-defined error[s]
UPD4_FAIL_511 Payload installation permission denied by device
UPD4_FAIL_512 Payload installation permission could not be provided by device

LwM2M Standard Object

Event log code Portal text Possible corrective action
UPD1_OK_1 Firmware successfully updated
UPD1_FAIL_2 Insufficient storage Check the flash of the device.
UPD1_FAIL_4 Connection lost Check the device's connectivity.
UPD1_FAIL_6 Package type unsupported Check the Update certificate and manifest.
UPD1_FAIL_7 Download URI invalid Check the URI in the manifest.
UPD1_FAIL_8 Update failed Check the version of the firmware.
UPD1_FAIL_9 Unsupported protocol Check the hashes of the firmware.

Service-generated items

Event log code Portal text Possible corrective action
SYS_100 Service error: Device could not be reached.
SYS_101 Service error: Device not registered, manifest not sent.
SYS_102 Service error: Device Vendor ID does not match Manifest Vendor ID.
SYS_103 Campaign was manually stopped. Device not updated.
SYS_104 Campaign was manually stopped. Device may still update.
SYS_105 Device deregistered.
SYS_106 Device registered.
SYS_107 Device bootstrapped.
SYS_108 Device added to campaign.
SYS_109 Device removed from campaign.
SYS_110 Device already at desired state.
SYS_111 Device failed to reach desired state.
SYS_112 Device reached desired state.